Question & Answer
Question from Motor Manufacturer K:
We have a 36V 370W brushed DC motor with a wire diameter of Ø0.85 mm.
Could you please advise on the maximum acceptable value for the welding resistance in the resistance measurement device?
What should be the maximum welding resistance to ensure the wound rotor is free of any issues?
Wind Automation reply:
The maximum acceptable welding resistance would setting a maximum limit of 0.1 mΩ is appropriate,
When the welding resistance is 0.3mΩ , the motor will be risk of burning which is caused by high current as a high resistance,
DC Power Supply Spot Welding Machine For Armature Commutator Fusing Hot Staking WIND-DC-CW003
(1) Application:
PMDC motor armature with hook commutator, riser commutator
(2) Advantages:
| Fusing Quality Assured | Self-developed High frequency 15KHz power supply ensure constant fusing quality |
| Wide Application | Copper wire wide adaption from 0.01mm~1.20mm(AWG44~AWG17) |
| Easy to Operate | Easy for the operator, and WIND-DC-CW003 get most repeated order among welding machine |
(3) History of becoming star product:
The first two pcs welding machine WIND-DC-CW003’s user was a car motor manufacturer who produce
motors and supply to BMW and Volvo, they used Italy and English imported welding machine and WIND-
DC-CW003 worked as backup machine. After several months test user found welding result and quality is
same as imported welding machine and ordered 1pc more three years later.
High frequency inverter DC power supply is a trend in commutator welding, some supplier said they use
high frequency actually they use 2KHz, while Wind Automation can achieve 15KHz, with real and pure DC
power supply which achieve constant welding quality!
(4) Fusing machine Parameter:
Wire diameter: 0.01~1.2mm
Armature OD: 20~100mm
Armature stack height:10~100mm
Commutator OD:8~70mm
Airsource:5~7KG/cm2
Welding power: 10~30KW
3phase AC 380V 50~60Hz
Weight: about 350KGS
Fusing power supply: Wind Automation self developed high frequency 15KHz, 500~5000A
Control system: Japan Mitsubishi PLC
Indexing control: Japan Mitubishi servo positioning system 7'' Touch screen
(5) Feature:
Commutator spot welding machine conductor hot staking Fusing for thin or big wire High frequency
inverter weld and hot stacking commutator with small big wire thin and big wire, with separate cooling
water device (act as a conditioner)
How to acheive good fusing quality, below four factors you can check
1. Adjust the fusing current to suitable current
2. Right pressure to the fusing soldering area
3. Fusing time
4. Conductor resistance, it is related to the electrode contacting area
Please click below picture to view video
|
|
Brushed DC Power Supply Spot Welding Hot Staking Machine For Armature Commutator Fusing Images
|
